← Concept Library · Economy
Economy GS 3 In the news 2 times

Basel III

The International Capital Adequacy Framework

Basel III is a set of global rules that tell banks how much of their own money (capital) and how much easily sellable cash-like assets (liquidity) they must keep, so that they can survive bad times without collapsing. The rules are made by the Basel Committee on Banking Supervision (BCBS), a group of banking regulators from major economies. The rules are not a treaty; each country's regulator adopts them through its own rules. In India, the RBI applies them to banks.

Why does it exist?

A bank works on trust and borrowed money. If it lends too much with too little of its own money, a few bad loans can wipe it out, and depositors panic. One bank's failure can then spread to others, because banks lend to each other. The 2008 global financial crisis showed that banks had too little good-quality capital, borrowed too much, and could not get cash quickly when markets froze. Basel III was designed to fix all three problems.

Where did it come from?

  • 1974: The Basel Committee was set up at the end of 1974 by the central bank governors of the Group of Ten (G10) countries, after the failure of a German bank, Bankhaus Herstatt. It is hosted by the Bank for International Settlements (BIS) in Basel, Switzerland.
  • Basel I (1988): Set the first common rule: banks must keep capital of at least 8% of their risk-weighted assets. It focused mainly on credit risk (the risk that borrowers do not repay).
  • Basel II (2004): Added a three-pillar structure: Pillar 1 (minimum capital), Pillar 2 (supervisory review, where the regulator checks each bank's own risk assessment) and Pillar 3 (market discipline, through public disclosure). It also covered operational risk and market risk.
  • Basel III (December 2010): Made capital stronger and added new rules on leverage and liquidity, after the 2008 crisis. Its remaining parts were finalised in December 2017; some people informally call this final package "Basel IV".
  • India became a member of the Basel Committee in 2009 when the Committee expanded beyond the G10.

How does capital work under Basel III?

Bank capital is arranged in layers, from strongest to weakest:

  1. Common Equity Tier 1 (CET1): shareholders' money and saved profits. This absorbs losses first and is the strongest.
  2. Additional Tier 1 (AT1): perpetual bonds that can be written off or converted into shares (see the AT1 bridge above).
  3. Tier 2: weaker capital such as subordinated bonds with a maturity of at least 5 years and some general loan-loss provisions. It absorbs losses mainly when the bank is being wound up.

All requirements are a percentage of risk-weighted assets (RWA). A simple example: if a bank has ₹1,000 crore of risk-weighted loans and the rule is 11.5%, it must hold at least ₹115 crore of capital.

The key numbers (global Basel III vs India)

The RBI sets stricter rules than the global minimum:

Requirement Basel III (global) RBI (India)
Minimum CET1 4.5% 5.5%
Minimum Tier 1 (CET1 + AT1) 6% 7%
Minimum total capital (CRAR) 8% 9%
Capital Conservation Buffer (CCB, in CET1) 2.5% 2.5%
Total capital including CCB 10.5% 11.5%
Leverage ratio 3% 4% for D-SIBs, 3.5% for other banks

The buffers

Basel III added extra layers of capital on top of the minimum:

  • Capital Conservation Buffer (CCB): 2.5% of RWA, held in CET1. A bank can use it in bad times, but if it dips into it, it must cut dividends and bonuses until the buffer is rebuilt.
  • Countercyclical Capital Buffer (CCyB): up to 2.5%, built up when lending is growing too fast and released in a downturn. The RBI issued its CCyB framework in 2015, but has not yet switched it on (it stands at 0%) [Unverified for the current date].
  • Surcharge for systemically important banks: Banks that are "too big to fail" must hold extra CET1. In India these are called Domestic Systemically Important Banks (D-SIBs). In the RBI's 2025 list, they are SBI (extra 0.80%), HDFC Bank (0.40%) and ICICI Bank (0.20%).

Leverage and liquidity rules

Basel III does not trust risk weights alone, because banks can underestimate risk.

  • Leverage ratio: Tier 1 capital divided by the bank's total exposure (all assets, without risk weights, plus off-balance-sheet items). The RBI set it at 4% for D-SIBs and 3.5% for other banks, from 1 October 2019.
  • Liquidity Coverage Ratio (LCR): a bank must hold enough High-Quality Liquid Assets (like government bonds) to cover its expected cash outflows for 30 days of stress. The minimum is 100%. In India it was phased in from January 2015 to January 2019.
  • Net Stable Funding Ratio (NSFR): a bank's long-term assets must be funded by stable sources over a one-year horizon. The minimum is 100%. In India it applies to banks from October 2021.

India's position

The RBI began applying Basel III from 1 April 2013, and phased in the full rules over the following years. The capital adequacy of Indian banks is reported as CRAR (Capital to Risk-weighted Assets Ratio). The RBI also uses the Prompt Corrective Action (PCA) framework: if a bank's capital, bad loans or leverage cross set limits, the RBI restricts its lending, dividends and expansion until it recovers. Public sector banks were recapitalised (given fresh capital) by the government partly to meet Basel III norms.

Commonly confused concepts

  • Basel Committee vs Bank for International Settlements (BIS): The BIS is an organisation of central banks (set up in 1930) that hosts the Basel Committee. The Basel Committee makes the banking standards.
  • CRAR vs CRR: CRAR is the bank's capital as a share of its risky assets (a safety cushion). The Cash Reserve Ratio (CRR) is the share of a bank's deposits it must keep as cash with the RBI (a monetary policy tool).
  • Capital ratio vs leverage ratio: The capital ratio uses risk-weighted assets. The leverage ratio uses total exposure without risk weights, as a backstop.
  • LCR vs NSFR: LCR is short-term (30 days of stress). NSFR is longer-term (one year of stable funding).
  • CCB vs CCyB: CCB is fixed at 2.5% at all times. CCyB is switched on or off depending on the credit cycle.

Issues, criticism and the way forward

  • Cost of credit: Higher capital means banks must raise more costly money. Critics argue this can reduce lending, especially to small businesses, in a developing economy that needs more credit.
  • India's stricter norms: India keeps higher minimums than global Basel III. Supporters say this protects a system with high past bad loans. Others argue it ties up capital that could support growth.
  • Burden on the government: As the main owner of public sector banks, the government has had to put in large sums of taxpayers' money to keep them above capital norms.
  • Complexity and risk models: Large banks can use their own models to calculate risk weights, which can understate risk. The 2017 reforms limit this through an "output floor".
  • Loss-bearing instruments: Cases like Yes Bank and Credit Suisse show that the legal rules for writing off AT1 bonds must be very clear. Many experts suggest a full statutory framework for resolving failed banks and financial firms in India.

Concepts to Know

  • Capital adequacy: Whether a bank has enough of its own money to absorb losses. Measured as a ratio of capital to risk-weighted assets.
  • Liquidity: How quickly something can be turned into cash without losing value. A bank may be healthy but still fail if it cannot get cash fast enough when depositors ask for it.
  • Systemically important bank: A bank so big and connected that its failure could harm the whole economy. Also called "too big to fail".
  • Off-balance-sheet items: Promises a bank has made that are not yet loans, such as guarantees given to customers, which may become loans later.
  • Recapitalisation: Putting fresh capital into a bank, usually by its owner, to make its cushion strong again.
Key details
  • Basel Committee set up at the end of 1974 by G10 central bank governors; hosted by BIS, Basel, Switzerland
  • Basel I: 1988 (8% capital); Basel II: 2004 (three pillars); Basel III: December 2010; finalised December 2017
  • India: member of the Basel Committee since 2009; RBI implementation of Basel III from 1 April 2013
  • RBI minimums: CET1 5.5%, Tier 1 7%, total capital 9%; with CCB 2.5%, total 11.5%
  • Global minimums: CET1 4.5%, Tier 1 6%, total capital 8%; with CCB 10.5%
  • Leverage ratio (RBI): 4% for D-SIBs, 3.5% for others, from 1 October 2019; global 3%
  • LCR: 100%, 30-day horizon; NSFR: 100%, one-year horizon (India from October 2021)
  • D-SIBs (2025 list): SBI (0.80%), HDFC Bank (0.40%), ICICI Bank (0.20%) additional CET1
In the news

● Tracked since April 27, 2026 · last seen November 16, 2026 · updates as the daily brief publishes

Related concepts
See it in today’s brief. Daily current affairs with every static concept explained in place.
Read the daily brief